Summary: This walk through will assist with updating multiple injection rate setpoints for Commander (PMC) and Admiral (ODC).
Bulk Upload for Commander (PMC) and Admiral (ODC) units.
- Choose the GROUP you would like to update the Commander (PMC) and Admiral (ODC) unit.
- From the GROUP page choose CONTROL on the left side of your screen.
- Next choose NEW JOB highlighted in blue.
From here you can also view the Upload Job History.
- Next, choose the template for COMMANDER (PMC) or ADMIRAL (ODC) to update your injection rate.
NOTE: Templates cannot be combined. You can only update either PMC or ODC individually. - Once you have chosen your template to update, the EXPORT/IMPORT buttons will highlight in blue. Choose EXPORT.
Once you EXPORT a file it will download to your downloaded files (or where ever you have downloaded files export to), open your exported Excel file. Once you open your exported file you will see a list of your sites, serial numbers, API numbers (if applicable), Device Serial, old setpoint, and new setpoint. From here you can update your New Setpoint (column F) and then save.
NOTE: You do not have to fill out New Setpoint if there is no change to the injection rate.
6. Once you have saved your file, go back to UPLOADS tab and choose IMPORT. Find your file where ever you have it saved and click on OPEN.
7. It will upload your file into LIFT and once the upload is done you will see the SUBMIT button turn blue. Now you are ready to submit your updates, hit SUBMIT.
Once submitted one additional pop up will appear asking, "Are you sure?" you want to submit the update. Verify your changes and choose ACCEPT.
Once you ACCEPT a summary page will populate and this will inform you if the bulk upload completed successfully. If any sites fail the upload, it will show FAILED under the STATE column. If it was successful, the state will show SUCCESS.
You have successfully uploaded a bulk injection rate setpoint for you Commander(PMC) or Admiral (ODC) unit.
PRO TIP: If your group has 20 or less sites you can also update the injection rates directly on the bulk upload page at step 4. Once you choose our template your sites will populate along with the option to update the NEW SETPOINT. Update your setpoints and choose SUBMIT. Again, you have successfully updated your bulk injection rate setpoint for your Commander (PMC) or Admiral (ODC).