Summary: This walk through will assist with updating multiple injection rate setpoints for Scout (TLM) units which gives you the ability to see your injection variance.
Warning: Scout units do not have the ability to control your pump. This injection rate upload is solely for the purpose of viewing your injection variance.
To bulk update your Commander (PMC) or Admiral (ODC) units please click here.
Bulk Upload for Scout (TLM) units.
- Choose the GROUP you would like to update the Scout (TLM).
- From the GROUP page choose UPLOADS on the left side of your screen.
- Next choose NEW JOB highlighted in blue.
- From here you can also view the Upload Job History.
- Next, choose the template for TLM SETPOINTS to update your Scout (TLM) injection rate.
NOTE: You are able to update all templates listed in bulk. - Once you have chosen your template to update, the EXPORT/IMPORT buttons will highlight in blue. Choose EXPORT.
Once you export the file, it will be downloaded to your designated downloads folder. Open the exported Excel file to view a comprehensive list of your sites, including serial numbers, API numbers (if applicable), old setpoints, and new setpoints. You can then update the New Setpoint in column F as necessary, and be sure to save your changes.
NOTE: You do not have to fill out New Setpoint if there is no change to the injection rate.
- Once you have saved your file, go back to UPLOADS tab and choose IMPORT. Find your file where ever you have it saved and click on OPEN.
- It will upload your file into LIFT and once the upload is done you will see the SUBMIT button turn blue. Now you are ready to submit your updates, hit SUBMIT.
Upon submission, a summary page will be generated to indicate the success of the bulk upload. Should any sites encounter issues during the upload process, the STATE column will display FAILED. Conversely, a successful upload will be marked as SUCCESS, and your NEW VALUE will be clearly presented.
You have successfully uploaded a bulk injection rate setpoint for you Scout (TLM) unit.