Sites
      Back to home
      1. Knowledge Base
      2. LIFT
      3. Sites

      Remote Injection Rate Change for Commander (GPD) and Admiral (PPM)

      In this guide you will learn how to change your injection rate remotely from your PC, tablet or smart phone. Scout (TLM) units do not have this functionality.

      1. To adjust your injection rate, start by selecting the desired site from LIFT and navigate to the CONTROL SCREEN.
      2. Proceed to the PUMP - PUMP SETPOINT section and input your new injection rate setpoint. Please note that if you are using an Admiral (ODC) unit, your rate will be measured in PPM.
      3. After entering the new rate, click the arrow to submit the update.
      4. You can monitor the update process in the history section on the right. A green check mark will indicate that your new rate has been successfully updated.  

        NOTE:  Red x signifies your rate was not updated.  Try again, and if the error persists, call Client Success at 210-816-4600 ext. 2.

      remoteinjetion

      You have successfully updated your injection rate.