Changing from SETPOINT to SCHEDULED/BATCH treatment.

Minimum Requirements: Have a serial number of 10000 or higher. Originally purchased with the ODC subscription model.

1. Go to the CONTROL screen in LIFT and look for the PUMP CONTROL MODE and you will see the CHANGE MODE option.
   
   
   
   
2. Click on CHANGE MODE and a window will appear with options to change your PUMP MODE and PUMP OUTPUT (Timed or VSD depending on your pump application.) Choose SCHEDULED, then CLOSE at the bottom right.
   
   
   
   
3. Once you close the previous screen your CONTROL screen will be updated with the options to set up your scheduling. Under PUMP SCHEDULE you will see an edit (marked by green arrow below) and delete function, click on the edit pen to adjust your schedule.
   
   
   
   
4. In the edit PUMP SCHEDULE, you can update the Start Time, Pump on Duration in hours, days and weeks and the Recurrence in hours, days, and weeks. Finally, your setpoint. Once all your options are chosen, you will have a summary of your choices at bottom of your screen, choose SAVE and you are done.
   
   

**Pro Tip**

If your site is going to be down for a long period of time and you do not need to use your batch treatment, you have two options to turn it off and on.

1. If you know your site will be down for a total of 1 week, you can change your START TIME to the specific date/time when then you want your treatment to begin again.

2.     To stop your batch treatment indefinitely, change your SETPOINT to 0 GPD. Once your site           is back up and running, change your SETPOINT back to your desired injection rate.